|
Produktdetails:
|
| Produktname: | Sonde Digital ORP | Produktmodell: | DRH790 |
|---|---|---|---|
| Messbereich: | -2000~+2000 mV / 0,0~50,0 C | Auflösung: | 1 mV / 0,1 C |
| Genauigkeit: | +/-2 mV | Kalibrierungsmethode: | Nullpunkt-, Steilheits- und Abweichungskalibrierung |
| Betriebstemperatur: | 0~50 °C | Arbeitsdruck: | <=2 Balken |
| Wasserdichtigkeitsniveau: | IP68 | Leistungsbedarf: | 9 bis 36 VDC |
| Stromverbrauch: | Etwa 0,2 W | Elektrische Isolierung: | Stromversorgung und Kommunikation im Sensor isoliert |
| Kommunikationsschnittstelle: | RS485-MODBUS | Körpermaterial: | ABS |
| Elektrode: | Platin-Ringelektrode | Schalengröße: | D35 mm, Gesamtlänge ca. 260 mm mit Reinigungsdeckel |
| Größe der Anlage: | 1 Zoll NPT-Gewinde an beiden Enden, Einstecktiefe 100 mm (115 mm mit Stecker) | Installationswinkel: | Innerhalb von +/-30 Grad, nicht horizontal oder auf dem Kopf stehend |
| Gewicht: | Ungefähr 150 g ohne Kabel | Kabel: | PUR-Mantel, 10 m Standard, anpassbar |
| Verbindungsmethode: | Blanker Draht / M12-Stecker / wasserdichter Luftfahrtstecker | ||
| Hervorheben: | Platinum Ring ORP Electrode,ABS Body ORP Probe,1 inch NPT Insertion ORP |
||
Product Overview The DRH790 digital ORP probe is the installation-flexible member of the DRH790 family: a φ35 mm ABS-bodied ORP sensor with a platinum ring electrode and a genuine 1" NPT thread at both ends , so the same probe can be fitted to a side-wall bracket, a top flange, a pipe tee, a submerged holder or a flow-through cell without adapters. The 100 mm insertion depth (115 mm including the cleaning connector) matches standard imperial fittings, which is what most
Ansprechpartner: Yuki Fu
Telefon: +8615716217387